Search found 6642 matches
- Thu Apr 18, 24 10:59 am
- Forum: Wanted
- Topic: Window winder mechanism
- Replies: 1
- Views: 128
Re: Window winder mechanism
You may find that there is commonality between VE VF and VG cars and 67 68 69 US cars do you want a copy of the 62-69 parts book? https://www.facebook.com/groups/113400632659862/files/files can't think much difference between a VF 69 and VG 70 VIP Id also message CL Pete and Aussie Pete 2 different ...
- Mon Apr 08, 24 8:39 am
- Forum: Australian Cars
- Topic: VIP VG sedan
- Replies: 11
- Views: 6380
Re: VIP VG sedan
when it comes to window regulators there will be commonality with 66 67 68 US cars i would suspect yours is a VIP so the oddness on your car is slightly longer rear doors i.e the fronts should have internals much like a late 60s 4 door US model and of course the one that is worn out on yours is pass...
- Wed Apr 03, 24 1:40 pm
- Forum: Engine, Carburation & Electrics
- Topic: 318 carb tuning
- Replies: 4
- Views: 183
Re: 318 carb tuning
slightly less £££ than webcon. and here is something that you probably should avoid https://www.aliexpress.com/item/4001174196533.html?src=google&src=google&albch=shopping&acnt=494-037-6276&slnk=&plac=&mtctp=&albbt=Google_7_shopping&albagn=888888&isSmbAutoCall=fal...
- Wed Apr 03, 24 1:23 pm
- Forum: Engine, Carburation & Electrics
- Topic: 318 carb tuning
- Replies: 4
- Views: 183
Re: 318 carb tuning
https://www.webcon.co.uk/products/613-14031404-calibration-kit/ dunno if the kit is right look at the cost!!! Magnetti Marelli/LCN in spain who make the official weber carbs also make the current edelbrock carbs you will find a weber logo on there somewhere for 500 and 600 CFM carbs find a rover v8 ...
- Tue Apr 02, 24 11:14 am
- Forum: General Stuff
- Topic: favourite single-1st single
- Replies: 18
- Views: 925
Re: favourite single-1st single
dancing party shawaddy waddy..
i was 6
Dave
i was 6
Dave
- Wed Mar 20, 24 10:00 am
- Forum: Australian Cars
- Topic: For sale in UK
- Replies: 3
- Views: 500
Re: For sale in UK
id have this if it was £6K and put it right, sell the ford stuff, and put back a Mopar Drive train to fit that engine and box i think they will have hacked out the middle of the torsion bar cross member. so would need a new one of them fitted and it would be worth about £20K-£30K to an Australian in...
- Wed Mar 20, 24 9:28 am
- Forum: Australian Cars
- Topic: For sale in OZ
- Replies: 1
- Views: 386
Re: For sale in OZ
fantastic
lottery win to afford it mind £62K
Dave
lottery win to afford it mind £62K
Dave
- Mon Mar 11, 24 3:39 pm
- Forum: The Workshop
- Topic: Floyd Brothers 70 Challenger
- Replies: 905
- Views: 166110
Re: Floyd Brothers 70 Challenger
that's going to feel nice a solid and planted next time its driven..... It great when you get something done and you can feel the positive impact as soon as you drive it. it will be like vanishing point without the drugs and naked cycling on the drive home... just be careful if there are road works ...
- Mon Mar 04, 24 9:11 am
- Forum: Engine, Carburation & Electrics
- Topic: Heads for 318
- Replies: 33
- Views: 52430
Re: Heads for 318
keep that a whack a mustang t5 in it ...:) get the v6 one with the truck like 1st and a 0.73 Overdrive or the AX aisin warner that they used in the dodge trucks a bellhousing from 318 to the aisin warner exists makes it easier than the t5 https://www.novak-adapt.com/knowledge/transmissions/manual/ax...
- Thu Feb 29, 24 10:56 am
- Forum: Bodywork, Chassis & Suspension
- Topic: Strut Rod Bush?
- Replies: 9
- Views: 1040
Re: Strut Rod Bush?
the washers may be the correct way round for the year of the car and the rubber that was fitted if you look across a range of manuals you will find that chrysler changed their mind about 50,000 times over the 60s and 70s across early and late A and B bodies the age of the car would normally have had...
- Tue Feb 27, 24 9:43 am
- Forum: Engine, Carburation & Electrics
- Topic: 318 .. 360 Engine ?
- Replies: 18
- Views: 1356
Re: 318 .. 360 Engine ?
the spigot problem can be overcome depending on how short or long your input shaft is too short too small sleeve the end to 0.750 and run a dodge dakota roller spigot in the hub of the crank that usually accommodates the front of the converter too long and you may have to chop off some of the end ,a...
- Fri Feb 23, 24 11:41 am
- Forum: Restoration & Miscellaneous
- Topic: Graphics help
- Replies: 14
- Views: 1081
Re: Graphics help
Nice one stu.. try before you buy....
just keep saving copies so you can go back to the last good one after a disaster
i have a vision of you swearing at the PC at 3:30 am
Dave
just keep saving copies so you can go back to the last good one after a disaster
i have a vision of you swearing at the PC at 3:30 am
Dave
- Fri Feb 23, 24 9:52 am
- Forum: Engine, Carburation & Electrics
- Topic: 318 .. 360 Engine ?
- Replies: 18
- Views: 1356
Re: 318 .. 360 Engine ?
when you replace the crank its an aftermarket part, it probably assumes internally balanced assembly if you replace the rods....and i think you are gonna have to, you will need to get it all balanced up anyway to use standard rods you would have to get some pistons with the pin really quite high wit...
- Thu Feb 22, 24 3:59 pm
- Forum: Engine, Carburation & Electrics
- Topic: 318 .. 360 Engine ?
- Replies: 18
- Views: 1356
Re: 318 .. 360 Engine ?
360 like 318 but bigger capacity, different sized journals and externally balanced in standard cast crank form change crank and rods and balancer and torque converter (or remove weights) if manual you may have to make sure the crank has the spigot for the input shaft most were truck application so w...
- Mon Feb 19, 24 1:38 pm
- Forum: The Workshop
- Topic: Rob & Stu's 63 Polara 500
- Replies: 262
- Views: 17741
Re: Rob & Stu's 63 Polara 500
might be worth rigging up some vacuum advance. that will help stop the plugs getting grubby at idle 45* under no load is perfect :) with 15 initial to allow it to start. i never bothered with it until i got some bits recently for mine. vacuum can that worked and one of these https://www.gsparkplug.c...