68 charger mirror fitment

Anonymous · Post by **Anonymous** » Mon Jan 31, 05 7:20 pm

hi all, got a passenger side mirror for my charger on friday, have read the thread on positioning, but does the self tapping screw thats supplied, just go into the door sheet metal, or should there be some kind of reinforcing plate needed? thanks, trev

Alex · Post by **Alex** » Mon Jan 31, 05 7:24 pm

Sheet metal, do not overtighten or it will pull the panel

Anonymous · Post by **Anonymous** » Mon Jan 31, 05 8:16 pm

ok, thanks alex, will take it easy with the fitment!

Anonymous · Post by **Anonymous** » Mon Jan 31, 05 10:23 pm

The front edge of the mirror should have a threaded shaft attached to it, this is fixed by a flanged nut from inside the door, reached with door card removed and holding mirror through 1/4 light. The trailing edge of mirror is retained by self tapping countersunk screw.
By the way, its helluva alot better rear vision with that one fitted!

Anonymous · Post by **Anonymous** » Mon Jan 31, 05 11:02 pm

Her rates anygood

CP=corperel punishment?

Anonymous · Post by **Anonymous** » Mon Jan 31, 05 11:10 pm

Corrective Punishment!

Anonymous · Post by **Anonymous** » Mon Jan 31, 05 11:12 pm

Thankyou mistress