Re: Cortina MK3 V8 Mopar
Posted: Sat Mar 27, 21 6:45 pm
Nice, looks good in there and sounds good 
Thank you Sir!
Am really happy with the sound, just needs to be deeper and louder
Mopar Muscle Association UK
The premier Mopar club in Europe!
http://www.moparmuscleassociation.co.uk/forums/
Cortina MK3 with V8 Dodge 318
http://www.moparmuscleassociation.co.uk/forums/viewtopic.php?t=56020
Page 14 of 17
Re: Cortina MK3 V8 Mopar
Posted: Fri Apr 09, 21 9:16 am
Am really happy with the sound, just needs to be deeper and louder
Re: Cortina MK3 V8 Mopar
Posted: Fri Apr 09, 21 9:22 am
Ok
I have come to the end of the mopar bit for a while, so now its rear axle body work and customizing the car.
I did say I would only try and put Mopar related content up only . Would any of you be interasted in other work done to the car
I don't mind if not, as on the cortina forum there's nothing worse than someone posting up either a daily car or one of those awful kit cars made from cortinas back in the 70s and 80s
I have come to the end of the mopar bit for a while, so now its rear axle body work and customizing the car.
I did say I would only try and put Mopar related content up only . Would any of you be interasted in other work done to the car
I don't mind if not, as on the cortina forum there's nothing worse than someone posting up either a daily car or one of those awful kit cars made from cortinas back in the 70s and 80s
Re: Cortina MK3 V8 Mopar
Posted: Fri Apr 09, 21 9:48 am
I'm interested but then I am a fellow Cortina owner!TIB3300 wrote: Fri Apr 09, 21 9:22 am Ok
I have come to the end of the mopar bit for a while, so now its rear axle body work and customizing the car.
I did say I would only try and put Mopar related content up only . Would any of you be interasted in other work done to the car
I don't mind if not, as on the cortina forum there's nothing worse than someone posting up either a daily car or one of those awful kit cars made from cortinas back in the 70s and 80s
Re: Cortina MK3 with V8 Dodge 318
Posted: Fri Apr 09, 21 9:55 am
I for one would like to see continued updates on the whole build, we all have different interests within this hobby and I think most if not all enjoy any project, take Will's "Jade" for example.
So keep them coming
So keep them coming
Re: Cortina MK3 with V8 Dodge 318
Posted: Fri Apr 09, 21 11:16 am
Defo keep it coming !!!
Re: Cortina MK3 with V8 Dodge 318
Posted: Wed Aug 25, 21 6:32 am
Morning Moparee's
I hope your enjoying the summer and shows, you never know I may have a car to pop along and see some of you
I do keep checking in, For those who are interested a little update. 
I now have all the running gear installed in the car , this is axle number 3
Ford 8.8 narrowed with Ford explorer ends welded on, as the explorer shafts are 31 spline and wouldn't fit in the tubes
I hope your enjoying the summer and shows, you never know I may have a car to pop along and see some of you
I do keep checking in,
For those who are interested a little update. I now have all the running gear installed in the car , this is axle number 3
Ford 8.8 narrowed with Ford explorer ends welded on, as the explorer shafts are 31 spline and wouldn't fit in the tubes
Re: Cortina MK3 with V8 Dodge 318
Posted: Wed Aug 25, 21 9:05 am
that's pretty, will you box the upper and lower arms for strength/stiffness? it's a common trick for gm a body cars to help with handling.
neil.
neil.
Re: Cortina MK3 with V8 Dodge 318
Posted: Wed Aug 25, 21 2:52 pm
Hiya Neilmygasser wrote: Wed Aug 25, 21 9:05 am that's pretty, will you box the upper and lower arms for strength/stiffness? it's a common trick for gm a body cars to help with handling.
neil.
I have added a 4mm flat bar along the lower arms on the inside of both, I did think of boxing them, but didnt in the end.
As I wanted to see if all worked well first
I do have a spare set of arms I could make up Re: Cortina MK3 with V8 Dodge 318
Posted: Wed Aug 25, 21 4:04 pm
i thought you'd have it covered mateTIB3300 wrote: Wed Aug 25, 21 2:52 pmHiya Neilmygasser wrote: Wed Aug 25, 21 9:05 am that's pretty, will you box the upper and lower arms for strength/stiffness? it's a common trick for gm a body cars to help with handling.
neil.
I have added a 4mm flat bar along the lower arms on the inside of both, I did think of boxing them, but didnt in the end.
As I wanted to see if all worked well first
Re: Cortina MK3 with V8 Dodge 318
Posted: Wed Aug 25, 21 6:29 pm
Thanks for the inputmygasser wrote: Wed Aug 25, 21 4:04 pmi thought you'd have it covered mateTIB3300 wrote: Wed Aug 25, 21 2:52 pmHiya Neilmygasser wrote: Wed Aug 25, 21 9:05 am that's pretty, will you box the upper and lower arms for strength/stiffness? it's a common trick for gm a body cars to help with handling.
neil.
I have added a 4mm flat bar along the lower arms on the inside of both, I did think of boxing them, but didnt in the end.
As I wanted to see if all worked well first
Re: Cortina MK3 with V8 Dodge 318
Posted: Wed Aug 25, 21 6:30 pm
I think we will have to catch up some time next yearmygasser wrote: Wed Aug 25, 21 4:04 pmi thought you'd have it covered mateTIB3300 wrote: Wed Aug 25, 21 2:52 pmHiya Neilmygasser wrote: Wed Aug 25, 21 9:05 am that's pretty, will you box the upper and lower arms for strength/stiffness? it's a common trick for gm a body cars to help with handling.
neil.
I have added a 4mm flat bar along the lower arms on the inside of both, I did think of boxing them, but didnt in the end.
As I wanted to see if all worked well first
Re: Cortina MK3 with V8 Dodge 318
Posted: Wed Aug 25, 21 10:17 pm
that'd be goodTIB3300 wrote: Wed Aug 25, 21 6:30 pmI think we will have to catch up some time next yearmygasser wrote: Wed Aug 25, 21 4:04 pmi thought you'd have it covered mateTIB3300 wrote: Wed Aug 25, 21 2:52 pm
Hiya Neil
I have added a 4mm flat bar along the lower arms on the inside of both, I did think of boxing them, but didnt in the end.
As I wanted to see if all worked well first
Re: Cortina MK3 with V8 Dodge 318
Posted: Fri Sep 03, 21 8:40 pm
Re: Cortina MK3 with V8 Dodge 318
Posted: Fri Sep 03, 21 9:06 pm