Dave999's Aussie Charger

Ivor · Post by **Ivor** » Sat Aug 18, 07 12:24 pm

Check out Edgeware Motor Accessories too, they helped me out with some old profiles I couldn't find in the States.

Dave999 · Post by **Dave999** » Mon Aug 20, 07 8:57 am

i got a brand new Made in GB screen fitted last year

the fitter came with a new rubber but did not use it

i'll dig out the recipte to see who it was

£50 excess on my classic insurance and doesn't affect premium

Dave

Dave999 · Post by **Dave999** » Mon Aug 20, 07 9:20 am

exactly

the dodgey geez stole me new rubber

and

where the hell does anyone get a brand new laminated front screen with all the pilkington British standard blerb on it for a car that was not at all popular here

Tres odddddddddddddddddddd

Dave

Dave999 · Post by **Dave999** » Mon Aug 20, 07 10:25 am

No sir you miss my point

brand new

as in made last week brand new

not New old stock

brand spanking diddly new..... with green plastic stuck to it proper laminated not crack ya skull toughend circa 1960-1990

what the........... dave says out loud, and everyone turns round, must stop talking to myself.

yeah well-odd i know

Dave

Anonymous · Post by **Anonymous** » Mon Aug 20, 07 3:28 pm

Not as odd as how mch Mr. Nineninenine looks like David Gray in his Avtar.

Trigger_Andy · Post by **Trigger_Andy** » Mon Aug 20, 07 4:12 pm

Clivey wrote:Not as odd as how mch Mr. Nineninenine looks like David Gray in his Avtar.

You mean to say he's not??? I thought all his rambling's was practice for his new songs.

Dave999 · Post by **Dave999** » Mon Aug 20, 07 5:06 pm

My name is David Gray

no joke of lie

find me on facebook
or ebay

and i give you a shiny coin

how you know my name??????

and i have a wobbly heed

Mr Bratby can confirm
I have mailed him in the near past from my place of toil

I serve the nations dreams each week day between 9 and 17:30

Dave

Scooby · Post by **Scooby** » Tue Aug 21, 07 6:47 pm

Dave.
Nice motor as I said earlier, also good to meet you 2day ..name to a face and all that...
Good luck with your bits, will give you the heads up next time I venture up to Krispys...
Rich

Dave999 · Post by **Dave999** » Wed Aug 22, 07 9:00 am

yes indeed didn't realise you were so close.. wended my way through the lanes from the roundabout near J 17 only took about 15 mins

i will have to get myself across croydon way once i get this carb and maniofld back on

Dave

Dave999 · Post by **Dave999** » Thu Aug 23, 07 10:22 am

Gadzekes

when is a 10mm drill not a ten mm drill?

when its 10.2 mm drill for some unknown reason, measured it with me micrometer wrong wrong wrong says 10 on the shaft so it should be 10

10.2mm hole and a M10 tap do not mate in the correct manner

sausage down a bleeding tunnel

work will now stop until we purchase another chunk of purest steel.

OOOOOOOoooooooooooooooanoyance

Dave

latil · Post by **latil** » Thu Aug 23, 07 10:36 am

Scroll down this page,you need a smaller drill

http://www.threadtools.co.uk/taptech.htm