painting engine

Moderator: Moderators

Post Reply
User avatar
Ashley
Posts: 922
Joined: Sun Apr 18, 04 11:30 pm
Location: HULL EAST YORKSHIRE
Contact:

Post by Ashley »

Terry
I used DUPONT 2 pack on my motor still looks great.
Only burns around manifold crossover.
The match was spot on aswell.
User avatar
Ivor
Site Admin
Posts: 12998
Joined: Sun Apr 18, 04 11:11 pm
Location: The village of Evenley

Post by Ivor »

I've always used two pack on engines and apart from areas close to the headers, it usually survives.

The most important thing to do is to make sure the block is absolutely clean and degreased, apply a good etch primer and Bob's your uncle, straight on with the two pack Rover Vermillion and voila, Street Hemi orange as near as makes no difference...unless you've got a a turqoise engine, of course.
The pump don’t work coz the vandals took the handles.

www.ivorsroadrunner.com
User avatar
Ashley
Posts: 922
Joined: Sun Apr 18, 04 11:30 pm
Location: HULL EAST YORKSHIRE
Contact:

Post by Ashley »

U POL ACID ETCH
User avatar
Ivor
Site Admin
Posts: 12998
Joined: Sun Apr 18, 04 11:11 pm
Location: The village of Evenley

Post by Ivor »

Damn! Ashley pulled another holeshot on me! :wink:
The pump don’t work coz the vandals took the handles.

www.ivorsroadrunner.com
User avatar
TrevD
Posts: 4359
Joined: Sun Apr 18, 04 10:28 pm
Location: Essex

Post by TrevD »

this is the stuff , works wonders but be sure to use in a ventilated area ,
User avatar
Kev
Posts: 13939
Joined: Sun Apr 18, 04 11:04 pm
Location: Brisbane, Oz.

Post by Kev »

Do you operate a clean desk policy, Trev?
<center>
The name is Kev, nowadays known as Kevvy or Pommie C***!</center>
Post Reply