68 Charger. Engine swap. THE END.
Moderator: Moderators
It's a Federal pump but your brackets are for a Saginaw pump.
http://www.440source.com/powersteering.htm
http://www.440source.com/powersteering.htm
- Dave-R
- Posts: 24751
- Joined: Sun Apr 18, 04 11:23 pm
- Location: Dave Robson lives in Geordieland
- Contact:
Found it.
So this is the bracket to fit that pump you have to a 440.
But like I said it has been modified. I welded on two thick washer/spacers to move the bracket forward or something. Can't remember now but it was for a good reason at the time.
If you can use this let me know and you can have it for enough to cover postage.
So this is the bracket to fit that pump you have to a 440.
But like I said it has been modified. I welded on two thick washer/spacers to move the bracket forward or something. Can't remember now but it was for a good reason at the time.
If you can use this let me know and you can have it for enough to cover postage.
Thanks Adam. Did wonder about that... Its back on how it came off, but 180 deg might do it.
PS - Dropped oil out as matter of course (getting closer to fire up). It was like new - golden and clear. Had it even been run on that ?? Was most impressed.
PPS - What the heck do you tighten oil filters with ??? Mein gott ! Almost had to punch a bar through it to get the damn thing off. 30 mins with a chain wrench ! All good now though
PS - Dropped oil out as matter of course (getting closer to fire up). It was like new - golden and clear. Had it even been run on that ?? Was most impressed.
PPS - What the heck do you tighten oil filters with ??? Mein gott ! Almost had to punch a bar through it to get the damn thing off. 30 mins with a chain wrench ! All good now though
- latil
- Posts: 12076
- Joined: Tue Feb 01, 05 10:37 pm
- Location: Steve Pearson MMA/014. East Grinstead and Carmarthen.
Oil filters can be fun sometimes,the rubber seal seams to weld itself on. Don't really tighten oil filters,just screw on handtight + 3/4 turn tighter and check for leaks on startup. Always put some clean oil on the rubber sealing ring first and if possible fill the new filter with oil before fitting.
1965 Belvedere 2 426 Wedge.
Climate change,global warming,the biggest tax raising scam ever devised by man for mankind.
Motivating Our People,Accelerating Rapidly.
Climate change,global warming,the biggest tax raising scam ever devised by man for mankind.
Motivating Our People,Accelerating Rapidly.
2 forward, one back...
Guess what ? Throttle mount brackets are different on a small block. Also aftermarket ones sit too high to be used with standard throttle cable. Now need to source a BB bracket... therefore sum total of tonights work is "put in one fuel pipe". Still - it all adds up I suppose.
I should be writing this down. "The 1,000 differences between a small block and a big block" (madness causes grinning)
Progress coming on though. Will post pics as soon as I can get onto the other computer (wife is on it)
Edit - couple of pics. Coming on... Think I'm missing Nats though.
Guess what ? Throttle mount brackets are different on a small block. Also aftermarket ones sit too high to be used with standard throttle cable. Now need to source a BB bracket... therefore sum total of tonights work is "put in one fuel pipe". Still - it all adds up I suppose.
I should be writing this down. "The 1,000 differences between a small block and a big block" (madness causes grinning)
Progress coming on though. Will post pics as soon as I can get onto the other computer (wife is on it)
Edit - couple of pics. Coming on... Think I'm missing Nats though.